DECKPLY F17
Designed for your Formply solutions
Deckply is a high-quality plywood panel developed and engineered predominantly from graded eucalyptus veneers to the Australian Formwork plywood standard AS6669 as well as to the Australian and New Zealand standard AS/ NZS2269-Structural Plywood.
Glued with phenol formaldehyde resin and over laid with a hard durable water proof resin impregnated paper to give concrete a smooth finish. The glue is Marine A-BOND, E0. Deckply can withstand rigours of construction moisture and provide a significant number of re-uses.
Technical Specifications
- ADHESIVE: Phenolic resin
- BOND: Type A (Marine) AS/NZS2098 and AS2754
- EDGE SEAL: Edges are sealed with 3 layers acrylic latex paint, water based
- STRESS GRADE: F17 applies in both directions parallel and perpendicular to the face grain
- LENGTH: ±1mm
- WIDTH: ±1mm
- THICKNESS: ±3%
- SQUARENESS: ±2mm
Features & Benefits
- Achieve a Class 2 off-form finish on the first pour as per Deckply installation details and AS3610 subject conditions.
- Lightweight – the weight of 1800mm x 1200mm x 17mm is 22.5kg.
- Reusable – when good site concreting practices are used, Formply products can be reused numerous times.
- Flexible – easily shaped to fit custom sized applications, can be used on steel or timber form frame systems.
- Manufactured to stress grade of F17.
- Manufactured with “A” bond Phenolic adhesive with lowest formaldehyde emissions: E0. Edges coated with weather shield acrylic latex under coat plus a top coat to act as a water repellent edge sealant.
- Precise squareness and straightness.
Get in Touch