VIETNAMESE Solid Wood Drawers Corner Drawers & More Interior S torage Custom Dovetail Drawer Boxes

Custom Products | Summer 2021 10.1
Interior Storage
10
Custom Dovetail Drawer Boxes

Conestoga’s Drawer Box program offers multiple wood specie selections and custom options.
Information about dovetail drawer boxes and related options are found on the following pages.
Dovetail drawer boxes are fully assembled; Hard Maple, Soft Maple and Walnut can be ordered
unfinished or finished; Natural Birch drawer boxes are only available finished. See finishing
information contained in this section.
Natural Birch, Hard Maple, Soft Maple and Walnut drawer box options and accessories have a
7 day standard lead-time, and a 2 day Code Red expedite lead-time; add 2 days for finishing.
All other non-published drawer box species, add 5 additional days.
Custom Dovetail Drawer Box Specifications
The following species are available for the 5/8" Custom Dovetail Drawer Box program:
Hard Maple and Soft Maple boxes are constructed with solid Maple sides, fronts and backs and
1/4" or 3/8" thick Maple veneer (wood composite core) bottom.
Natural Birch drawer boxes are constructed with solid Birch sides, fronts, backs and 1/4" or 3/8"
thick Birch veneer face and sound back plywood bottom.
Walnut boxes are constructed with solid Walnut sides, fronts, backs and Walnut 1/4" or 3/8" thick
veneer plywood bottom.
Two finishing options are available with custom drawer boxes.
Standard finish on all program species is a durable, low emission UV topcoat.
Hand sprayed, catalyzed conversion varnish is available at an additional upcharge on
Hard Maple, Soft Maple and Walnut drawer boxes.
Both finish options have a 15° sheen topcoat. See Additional Options and Pricing Chart.
Natural Birch drawer boxes are also available with unsanded/unfinished dovetails as a cost
savings. Sides, backs and bottoms have a clear UV finish. Unfinished dovetails not available on
Hard Maple, Soft Maple or Walnut when finishing option is selected.
Dovetail Drawer Box Size Parameters
Description Minimum Maximum Increments
Height 2" 12" 1/2"*
Width 3" 46" 1/16"
Depth 3" 31" 1/16"
*1/8" added to accomodate 3/8" bottoms.
Custom Products | Winter 2020 10.3
Interior Storage
10
Undermount Notching Options
Undermount notching only (1-3/8").
Undermount notching with hook (1-3/8")
hole boring (detail shown below).
2-1/2" wide undermount notching only.
2-1/2" wide undermount notching with
hook hole boring (detail shown below).
5" wide undermount notching with
hook hole boring (included standard).
Minimum drawer box widths:
Standard notch: 6".
2-1/2" and 5" notch: 11-1/4".
Cut-Down Sides
Available for 3", 4" or 6" high drawer boxes
only.
Add 1/8" to box height dimensions when
ordering 3/8" bottoms.
Rear box height 2".
Unfinished dovetails not available.
Bread Box Top Routing
Designed for 1/8" or 1/4" thick lids.
9/32" deep groove on sides only.
1/8" rout is 5/32" wide.
1/4" rout is 9/32" wide.
Minimum box height 4".
Lid not included.
Dovetail Drawer Box Options
Reveal
Depth
1/2" or 3/8"
Back
Drawer Box Bottom
Undermount
w/hook hole boring
1/4" dia. x
3/8" Deep
1/4" dia. x
3/8" Deep
1/4" dia. x
3/8" Deep
29/32"
7/16"
1-3/8"
2-1/2" wide notch
w/hook hole boring
2-1/2"
7/16"
29/32"
5" wide notch
w/hook hole boring
5"
7/16"
29/32"
Hand Pull
Minimum box width is 8".
Hand pull is 5-1/4" wide and 11/16" deep,
centered on front of drawer box.
Unfinished dovetails not available.
Back
Front
Eased Edges
1/16" Radius
Eased Edges 1/16" Radius
Front
3" or 4" 2"
10.4 Custom Products | Winter 2020
Interior Storage
10
Keyboard Tray Option
Minimum box width 12".
Minimum box height 2".
Maximum box height 3-1/8".
Unfinished dovetails not available.
Dovetail Drawer Box Options (continued)
Eased Edges
1/16" Radius
Blum TANDEM Clip Options
Pre-drilling and installation options are for Blum TANDEM drawer hardware.
Pre-drilled pilot holes are drilled at the proper angle and spacing to accept TANDEM clips.
Minimum box width 5-1/2".
1/2" bottom reveal only.
Undermount notching with hook hole boring are an option and must be specified.
Blum TANDEM Clips feature side-to-side, height and depth adjustment for fine tuning drawer
front alignment. Loose clips not available.
Blum TANDEM Clips Pre-drilled Blum TANDEM Clips Installed
Eased Edges
1/16" Radius Front Only Front and Back
Blum part number
T51.1901
Custom Products | Winter 2020 10.5
Interior Storage
10
Dovetail Drawer Box Options (continued)
B
4" A C D
Charging Station Rout
Customizable rout is designed to
accommodate charging station and drawer
mounted receptacle devices (rout only –
charging device not included).
Rout is always in the back of the drawer
box; no options.
Minimum drawer box width is 12", minimum
box height is 4".
Must specify A, B, C and D dimensions.
Use Form #6-A – Specialty Drawer Box
Order Form.
Charging rout can be centered or off-set
from either side.
Minimum dimensions for Charging Station
Rout:
Dimension A is 1".
Dimension B is 1/2".
Dimension C is Drawer Box width minus
2".
Dimension D is Drawer Box height minus
1-1/2".
Not available with unfinished dovetail option.
10.6 Custom Products | Winter 2020
Interior Storage
10
Dovetail Drawer Box Options (continued)
1/2"
1/4"
Roll Out Drawer Front Option
Drawer box front is 1" wider than the
overall ordered box width.
Minimum box width is 8".
Visible Storage Unit Routing
Minimum box width is 12".
Maximum box width is 24".
Minimum box height is 7".
Removable divider included. Located
1-1/2" behind front of drawer box.
1"
1"
Back Recessed Option
Minimum drawer box width is 12".
Minimum depth is 8-1/4".
Must specify A, B and C dimensions.
Recess can be centered or off-set from
either side.
Minimum dimension for A and B is 4".
Minimum dimension for C is 3-5/8".
A B
C
Custom Products | Summer 2021 10.7
Interior Storage
10
Custom Drawer Accessories
17-1/2"–32"
3/8"
3"
3-1/8"
3/8"
7-1/2"–13"
3"
3-1/8"
3/8"
14"–25-1/4"
3"
3-1/8"
3"
10-1/2"–19"
3/8"
3-1/8"
Cutlery Dividers
Available in Hard Maple, Natural Birch and Walnut.
All cutlery divider designs are constructed with a 1/4" bottom unless “No Bottom” is specified.
When ordering specify design A, B, C, D, E, F, G or H.
Specify depth and width in 1/16" increments. Both dimensions are measured from outside edge
to outside edge.
Depth for all designs must be between 16" to 22". Refer to specific design for width range.
When ordered with a drawer box, cutlery dividers are sized 1-5/16" less than the exterior width
and depth of the overall drawer box size.
To order a custom size cutlery divider, specify the depth, width and design as a separate line
item on the order form.
Standard height is 3-1/8". Height modifications available; see following pages for options and
pricing.
Finishing Option charge.
Design A:
Natural Birch
Hard Maple
Walnut
Design C:
Natural Birch
Hard Maple
Walnut
Design D:
Natural Birch
Hard Maple
Walnut
Design B:
Natural Birch
Hard Maple
Walnut
10.8 Custom Products | Summer 2021
Interior Storage
10
Custom Drawer Accessories (continued)
3/8"
14"–25-1/4"
3-1/8"
3/8"
17-1/2"–32"
3-1/8"
1-5/8"
Front
Sliding Cutlery Divider
Available with all divider configurations;
specify design when ordering.
Top divider is 1-3/8" high mounted on a
1/4" base.
Recommended maximum drawer box
width is 24" to ensure proper operation.
3/8"
7-1/2"–13"
3-1/8"
10-1/2"–19"
3/8"
3-1/8"
No Bottom Option
No upcharge.
All cutlery divider designs are constructed with a 1/4" bottom unless “NO BOTTOM” is specified.
Maximum height of cutlery dividers with no bottom is 2-7/8".
Reduced Height Option
All divider designs can be reduced in height for specialty applications.
Specify divider height when ordering.
Minimum divider height with bottom is 1-5/8".
Minimum divider height without bottom is 1-3/8".
Design E:
Natural Birch
Hard Maple
Walnut
Design G:
Natural Birch
Hard Maple
Walnut
Design H:
Natural Birch
Hard Maple
Walnut
Design F:
Natural Birch
Hard Maple
Walnut
Custom Products | Summer 2021 10.9
Interior Storage
10
Fineline Cutlery Dividers
Unique, tapered divider design affords sturdy
compartment divisions with pleasing minimal profile.
Available in Natural Birch or Walnut with a clear finish.
Unit size prior to trimming is 1-15/16" high x
20-13/16" long. Standard widths shown in the
pricing chart below.
Base plate is designed to be trimmed to fit the
interior dimensions of a specific drawer box.
Each unit includes a trimmable depth extender for a
truly custom fit and maximum storage.
Optional knife block can be incorporated into cutlery
units for maximum utensil storage.
Knife block measures 5-7/16" wide x 16-11/16"
deep and accommodates 5 pieces of cutlery.
Cut-to-size Option
All Fineline dividers can be cut to fit inside a drawer
box. Specify interior dimensions of drawer box.
Dividers will be packaged independently of the
drawer box.
Cut-to-size Option.
Custom Drawer Accessories (continued)
Part No. Description Price
556.87.601 Fineline Cutlery Insert – Walnut – 15-9/16" wide
556.87.602 Fineline Cutlery Insert – Walnut – 21-9/16" wide
556.87.603 Fineline Cutlery Insert – Walnut – 27-5/8" wide
556.87.604 Fineline Cutlery Insert – Walnut – 33-9/16" wide
556.87.901 Fineline Cutlery Insert – Birch – 15-9/16" wide
556.87.902 Fineline Cutlery Insert – Birch – 21-9/16" wide
556.87.903 Fineline Cutlery Insert – Birch – 27-5/8" wide
556.87.904 Fineline Cutlery Insert – Birch – 33-9/16" wide
Part No. Description Price
556.91.640 Fineline Knife Block – Walnut – 5-7/16" wide x 16-11/16" long
556.91.940 Fineline Knife Block – Birch – 5-7/16" wide x 16-11/16" long
Trimmable Area
10.10 Custom Products | Summer 2021
Interior Storage
10
Custom Drawer Accessories (continued)
3-3/4”
5-3/4”
7-3/4”
Individual Serving Beverage Pod Drawer Inserts
Available in Hard Maple, Natural Birch and Walnut.
All inserts are constructed using 3/8" sides and ends,
1/4" bottom and 5/8" top storage panel.
Height is 3-1/8". Width is fixed by design – no
customization.
Depth on all inserts is customizable between 16" and 22"
in 1/16" increments.
When ordered with a drawer box, inserts are sized
1-5/16" less than the exterior width and depth of the
overall drawer box size.
Inserts can be combined with any cutlery divider
design to fully utilize entire drawer width. When this
treatment is desired, specify the insert design as well
as the divider design.
Finishing Option charge.
Single Insert Design:
Natural Birch
Hard Maple
Walnut
Double Insert Design:
Natural Birch
Hard Maple
Walnut
Triple Insert Design:
Natural Birch
Hard Maple
Walnut
Custom Products | Summer 2021 10.11
Interior Storage
10
Knife Block Insert Natural Birch
Hard Maple
Walnut
Can be sized to fit a specific drawer
box or ordered separately. If ordering
separately, specify width and depth.
Knife block and handle rest are unfinished
mounted on a prefinished 1/4" bottom.
Spacing is 1-1/4" between slots.
Minimum insert: 7-1/2" wide x 16" deep.
Maximum insert: 21" wide x 22" deep.
Custom Drawer Accessories (continued)
Spice Tray Insert
Can be sized to fit a specific drawer
box or ordered separately. If ordering
separately, specify width and depth.
3/4" diameter finger hole centered on lead
rail for ease of removal from drawer box.
Spice rests are 5-1/4" wide, 1-1/2" high,
mounted on a prefinished 1/4" bottom.
Minimum insert: 7-1/2" wide x 17" deep.
Maximum insert: 32" wide x 22" deep.
Spice Tray Insert Width
Specie 7-1/2" – 15" 15-1/16" – 23" 23-1/16" – 32"
Natural Birch
Maple, Hard
Walnut
10.12 Custom Products | Summer 2021
Interior Storage
10
Circle Hand Pull
Minimum box width 5-3/4", minimum height 4".
Circle pull diameter is 1-1/2", placed 1" down from top
edge and centered on the width of the front of the box.
Front and back placement is optional and must be
specified. Additional upcharge applies.
Not available with unfinished dovetail option.
Custom Drawer Accessories (continued)
Ellipse Hand Pull
Minimum box width 9", minimum height 4".
Ellipse pull width is 5", placed 1" down from top edge
and centered on the width of the front of the box.
Front and back placement is optional and must be
specified. Additional upcharge applies.
Not available with unfinished dovetail option.
Finish Sample Chip Display Boxes
Dovetailed drawer boxes with hand pulls and interior
dividers accommodate Conestoga’s standard size
sample finish chips (3/8" thick x 4-3/8" wide x
6-1/8" high). Custom box sizing is also available to
accommodate custom dimensioned chips.
Finish sample chip sets must be ordered separately.
Matching specie wooden spacers are installed in
the front and back of each display box to allow easy
indexing of samples.
5" high boxes standard.
Sizing for standard Conestoga 26 piece chip sets:
Single set design: 5" high x 5-3/4" wide x 14" deep.
Double set design: 5" high x 10-5/8" wide x 14" deep.
Triple set design: 5" high x 15-1/2" wide x 14" deep.
To accommodate 32 piece chip sets, depth for all
designs should be ordered 16-5/8" deep.
Sample box price follows drawer box specie per lineal
inch Material Charge, assembly and finishing charges
plus the Design Charges.
To order customized Finish Sample Chip Display Boxes,
follow these min./max. size guidelines:
Single set design: min. width 5-3/4", max. width 15",
max. depth 21".
Double set design: min. width 10-5/8", max. width 24",
max. depth 21".
Triple set design: min. width 15-1/2", max. width 31",
max. depth 21".
Single Set Design:
Natural Birch
Hard Maple
Walnut
Circle pull front/
back standard
Double Set Design:
Natural Birch
Hard Maple
Walnut
Ellipse pull front/
back standard
Triple Set Design:
Natural Birch
Hard Maple
Walnut
Ellipse pull front/
back standard
Custom Products | Summer 2021 10.13
Interior Storage
10
Custom Drawer Accessories (continued)
Drawer Peg Storage System
The Drawer Peg Storage System is designed to be
installed in deep drawer boxes for stacked dishware
storage.
Each kit consists of a 5/8" thick Maple or Walnut
plywood base plate with a durable clear UV finish
and matching specie posts.
Base plates are available in 3 sizes and can easily be
trimmed to fit the interior dimensions of most drawer
boxes.
Base plates are pre-drilled with patterned holes to
accept the press in solid wood posts.
Matching specie posts are 6" in height.
Drawer Front not included.
Non-Slip Drawer Liners
Non-Slip Drawer Liners are the perfect anti-slip
material to keep utensils in place as drawers are
opened and closed.
The liner face is a non-slip rubber surface applied
over a polystyrene backer to deaden sound and
protect your drawer bottoms against drips and minor
spills.
The attractive grey fiber pattern looks great with
Birch, Maple, Walnut and metal drawer boxes.
Available in sheet form, these non-slip liners can be
easily trimmed for an exact fit.
Base Plate Size
Posts
Per Kit
Hard Maple Walnut
Part No. Price Part No. Price
5/8" x 24-1/4" x 21-1/4" 9 2103597 2103600
5/8" x 30-1/4" x 21-1/4" 12 2103598 2103601
5/8" x 39-1/4" x 21-1/4" 16 2103599 2103602
Part No. Color Size (W x H x D) Price
547.92.525 Grey 19-3/4" x 46-1/6"
547.92.526 Grey 23-5/8" x 46-1/16"
10.14 Custom Products | Summer 2021
Interior Storage
10
1-13/16"
Cabinet Side
Adjustable Pull-Out Tray System Kits
Adjustable Pull-Out Tray Hardware Systems
feature unfinished Soft Maple components and
75 lb. capacity ball bearing full extension drawer
slides. Drawer boxes not included.
Kits are available for base (24" deep), vanity
(21"deep) or tall utility (21" and 24" deep)
cabinetry applications. Base and vanity kits
include hardware for 2 full width pull-outs. Tall
kits include hardware for 4 full width pull-outs.
Two cleat widths “A” or “B” (horizontal drawer
slide supports) are available to accommodate
overlay or inset and framed or frameless cabinet
construction.
Vertical corner cleats can be trimmed in height to
accommodate adjustable shelves.
4 day Standard lead-time, 2 day Code Red
expedite lead-time.
System Cleat width “A”
For frameless and overlay applications.
Base/Tall: 3/4" x 1-5/16" x 21-15/16".
Vanity: 3/4" x 1-5/16" x 18-15/16".
Base/Vanity Corner Cleats
4 pieces 3/4" x 1" x 19-1/4" (six positions).
Tall Corner Cleats
4 pieces 3/4" x 1" x 51-3/4" (16 positions).
Cabinet Accessories
System Cleat width “B”
For framed and inset applications.
Base/Tall: 3/4" x 2-1/16" x 21-15/16".
Vanity: 3/4" x 2-1/16" x 18-15/16".
2-9/16"
Cabinet Side
System Kits - Cleat Width “A” System Kits - Cleat Width “B”
Kit Number Description Price Kit Number Description Price
SYSB24-AA Base 24" (3/4" x 1-5/16" x 21-15/16") SYSB24-BA Base 24" (3/4" x 2-1/16" x 21-15/16")
SYSTB24-AA Tall 24" (3/4" x 1-5/16" x 21-15/16") SYSTB24-BA Tall 24" (3/4" x 2-1/16" x 21-15/16")
SYSV21-AA Vanity 21" (3/4" x 1-5/16" x 18-15/16") SYSV21-BA Vanity 21" (3/4" x 2-1/16" x 18-15/16")
SYSTV21-AA Tall 21" (3/4" x 1-5/16" x 18-15/16") SYSTV21-BA Tall 21" (3/4" x 2-1/16" x 18-15/16")
Single Shelf Kits - Cleat Width “A” Single Shelf Kits - Cleat Width “B”
Kit Number Description Price Kit Number Description Price
SYSSB24-AA Base 24" (3/4" x 1-5/16" x 21-15/16") SYSSB24-BA Base 24" (3/4" x 2-1/16" x 21-15/16")
SYSSV21-AA Vanity 21" (3/4" x 1-5/16" x 18-15/16") SYSSV21-BA Vanity 21" (3/4" x 2-1/16" x 18-15/16")
Custom Products | Summer 2021 10.15
Interior Storage
10
X-Series Adjustable Pull-Out Tray System Kits
Adjustable Pull-Out Tray Hardware Systems
feature clear prefinished Hard Maple components
and patented drawer slide installation/adjustment
brackets. Drawer slides not included.
Installation/adjustment clips are designed for
TANDEM style undermount drawer slides.
Pilasters and brackets use 5mm x 32mm
spacing.
Kits are available for base, vanity or tall utility
cabinetry applications.
Two cleat widths are available to accommodate
overlay or inset and framed or frameless cabinet
construction.
Pilasters (vertical uprights) can be trimmed in
width or height for installation in varied styles of
cabinet construction and interior configurations.
Drawer box width and depth dimensions are
based on the requirements of the drawer
hardware being used and must be ordered
separately.
4 day Standard lead-time, 2 day Code Red
expedite lead-time.
Cabinet Accessories (continued)
1-1/4" Pilaster Kits with Brackets
Kit Number Description Cabinet Application Price
2100160 20-7/8" Pilasters (4), Brackets (8) Base with door and drawer
2100161 28" Pilasters (4), Brackets (8) Base full height door
2100162 58-5/8" Pilasters (4), Brackets (20) Tall Utility
2-1/2" Pilaster Kits with Brackets
Kit Number Description Cabinet Application Price
2100163 20-7/8" Pilasters (4), Brackets (8) Base with door and drawer
2100164 28" Pilasters (4), Brackets (8) Base full height door
2100159 58-5/8" Pilasters (4), Brackets (20) Tall Utility
1-1/4" 2-1/2"
1-1/4" Pilaster kits
with brackets
For frameless and most
framed overlay applications.
2-1/2" Pilaster kits
with brackets
For inset, wide framing and
thick door applications.
10.16 Custom Products | Summer 2021
Interior Storage
10
Spice Storage Units
Dovetail construction with 5/8" thick sides and ends.
1/4" plywood back flush with back of unit.
32mm line bore shelf support system.
5mm locking shelf clips.
Matching specie retainer rail attached to unit bottom and
each adjustable shelf.
Installation hardware is not included. Additional hinges
and adequate installation hardware are required to ensure
proper operation.
Available size range:
Height: 18" to 36".
Width: 8" to 21".
Depth: 3-1/8" fixed.
Finishing Option charge.
To determine the list price of an interior storage unit:
Find the size range of the unit in the applicable specie table. Select the price based on the overall
width and height of the unit.
Add finishing charges if applicable.
Shelves Per Unit
Unit Height # Per Unit
18" - 23" 2
23-1/16" - 31" 3
31-1/16" - 36" 4
Spice Storage Unit Pricing
Unit Height
Unit Width
8" – 13" 13-1/16" – 17" 17-1/16" – 21"
Natural Birch
21" – 23"
23-1/16" – 31"
31-1/16" – 36"
Unit Height Hard Maple
21" – 23"
23-1/16" – 31"
31-1/16" – 36"
Unit Height Walnut
21" – 23"
23-1/16" – 31"
31-1/16" – 36"
Spice Storage Unit Loose shelves
Natural Birch Hard Maple Walnut
Specify spice storage and unit width.
Finishing is included in price.
Cabinet Accessories (continued)
Custom Products | Summer 2021 10.17
Interior Storage
10
Can Storage Units
Dovetail construction with 5/8" thick sides and ends.
1/4" plywood back flush with back of unit.
32mm line bore shelf support system.
5mm locking shelf clips.
Matching specie retainer rail attached to unit bottom, fixed center shelf and
each adjustable shelf.
For structural integrity, units over 39" high have one fixed shelf, centered.
Installation hardware is not included. Additional hinges and adequate
installation hardware are required to ensure proper operation.
Available size range:
Height: 21" to 60".
Width: 8" to 21".
Depth: 5" fixed.
Finishing Option charge.
Units over 39" include 1 fixed shelf. Shelves Per Unit Unit Height # Per Unit 21" - 23" 2 23-1/16" – 31" 3 31-1/16" – 39" 4 39-1/16" – 47" 5
47-1/16" – 55"* 6
55-1/16" – 60"* 7
Can Storage Unit Pricing
Unit Height
Unit Width
8" – 13" 13-1/16" – 17" 17-1/16" – 21"
Natural Birch
21" – 23"
23-1/16" – 31"
31-1/16" – 39"
39-1/16" – 47"
47-1/16" – 55"
55-1/16" – 60"
Unit Height Hard Maple
21" – 23"
23-1/16" – 31"
31-1/16" – 39"
39-1/16" – 47"
47-1/16" – 55"
55-1/16" – 60"
Unit Height Walnut
21" – 23"
23-1/16" – 31"
31-1/16" – 39"
39-1/16" – 47"
47-1/16" – 55"
55-1/16" – 60"
Cabinet Accessories (continued)
Can Storage Unit Loose shelves
Natural Birch Hard Maple Walnut
Specify can storage and unit width.
Finishing is included in price.
10.18 Custom Products | Summer 2021
Interior Storage
10
Wall Organizer Units
Designed to be installed inside 9" or 12" wide full
height door wall cabinets.
Adjustable door mount hardware included.
Organizer units are fully assembled and packaged
with installation instructions.
Units include adjustable shelves with chrome rails
and full-extension ball bearing drawer glides.
Prefinished in Natural Birch only; unfinished units are
not available.
Doors not included.
Cabinet Accessories (continued)
Part No.
Size
(W x H x D)
Fits
Cabinet Price
2100778 5" x 26-1/4" x 10-3/4" 9" wide
2100779 8" x 26-1/4" x 10-3/4" 12" wide
Custom Products | Summer 2021 10.19
Interior Storage
10
Pull-Out Storage Unit Pricing
Part No. Description Price
2100750A 3" Base Pull-Out Storage Unit
2100751A 6" Base Pull-Out Storage Unit
2100752A 3" Wall Pull-Out Storage Unit - 30" high
2100753A 6" Wall Pull-Out Storage Unit - 30" high
2100754A 3" Wall Pull-Out Storage Unit - 36" high
2100755A 6" Wall Pull-Out Storage Unit - 36" high
2100756A 3" Wall Pull-Out Storage Unit - 42" high
2100757A 6" Wall Pull-Out Storage Unit - 42" high
Pull-Out Storage Units are designed for
3" or 6" spaces between cabinets and
can be accessed from both sides.
Storage units are fully assembled and
packaged with installation instructions.
Wall and base storage units include
adjustable shelves with chrome rails
and full-extension ball bearing slides.
Prefinished Natural Birch only;
unfinished units are not available.
Doors not included.
Pull-Out Storage Units
Wall Units
Available in 30", 36" and 42" high.
All Wall Storage Units 11-1/8" deep.
Base Units
All Base Storage Units 23"
deep and 30" high.
Pull-Out Storage Unit Installed
Mount Pull-Out Storage Units to adjacent cabinets.
Cabinet Accessories (continued)
10.20 Custom Products | Summer 2021
Interior Storage
10
Vanity Base Pull-Out
Vanity Base Pull-Out ships fully assembled and
includes drawer hardware and floor mounting cleats
for quick and easy installation.
Can be installed in both framed and frameless vanity
cabinets regardless of overlay or inset application.
Constructed from Natural Birch solids and plywood
finished with a durable, clear UV topcoat.
Includes two fixed shelves and one adjustable shelf.
Concealed undermount hardware is full extension
with soft close feature. Heavy duty top slide is rated
for 225 lbs. and eliminates excessive side to side
movement and sagging, even when fully extended.
Integrated 6-way adjustable door mounting hardware
allows for easy installation for all overlays and framing
widths. Requires a full height door.
This Vanity Base Pull-Out Unit can also be fitted with
an optional Grooming Organizer or Acrylic Tray Insert.
Door not included.
Cabinet Accessories (continued)
Grooming Organizer
Grooming Organizer Unit ships fully assembled.
Simply place on the top shelf of the Vanity Base
Pull-Out unit.
Includes one 3" and two 2" stainless canisters with
heat shields to prevent heat from transferring to
surrounding wood surfaces.
Features dividers for appliance cords and two
open storage trays on top of unit for additional
organization.
Acrylic Tray Insert
Clear acrylic tray sized to fit on top shelf of Vanity
Base Pull-Out Unit.
Divided into four separate compartments, the Acrylic
Tray Insert can be conveniently lifted out of the
Vanity Pull-Out Unit as needed.
G
Part No. Description Size (W x H x D)
Fits
Cabinet
Min.
Opening Price
2103585 Vanity Base Pull-Out 8" x 19-7/8" x 18-13/16" 12" 9"
2103586 Grooming Organizer 8" x 18-7/32" x 9" 12" 9"
2103587 Acrylic Tray Insert 8" x 10-3/32" x 3-7/16" 12" 9
(Optional Grooming Organizer shown)
Custom Products | Summer 2021 10.21
Interior Storage
10
Under Drawer Base Pull-Out
Designed especially for use in base cabinets with a
functioning top drawer.
Under Drawer Base Pull-Out Units ship fully
assembled and includes drawer hardware and floor
mounting cleats for quick and easy installation.
Can be installed in both framed and frameless
cabinetry.
Constructed from Natural Birch solids and plywood
finished with a durable, clear UV topcoat.
Includes two fixed shelves and one adjustable shelf.
Concealed undermount hardware is full extension
with soft close feature. Heavy duty top slide is rated
for 225 lbs. capacity and eliminates excessive side
to side movement and sagging, even when fully
extended.
Integrated 6-way adjustable door mounting hardware
allows for easy installation for all overlays and framing
widths.
Door not included.
Utensil Base Pull-Out
Utensil Base Pull-Out Unit ships fully assembled and
includes drawer hardware and floor mounting cleats
for quick and easy installation.
Can be installed in both framed and frameless
cabinetry.
Constructed from Natural Birch solids and plywood
finished with a durable, clear UV topcoat.
Top shelf houses four round stainless steel canisters
4" wide and 6-1/4" deep (included) for utensil storage.
Concealed undermount hardware is full extension
with soft close feature. Heavy duty top slide is rated
for 225 lbs. capacity and eliminates excessive side
to side movement and sagging, even when fully
extended.
Integrated 6-way adjustable door mounting hardware
allows for easy installation for all overlays and framing
widths.
Door not included.
Cabinet Accessories (continued)
Part No. Description Size (W x H x D)
Fits
Cabinet
Min.
Opening Price
2103589 Under Drawer Base Pull-Out 5-1/2" x 20" x 22" 9" 6"
2103590 Under Drawer Base Pull-Out 8-1/2" x 20" x 22" 12" 9"
Part No. Description Size (W x H x D)
Fits
Cabinet
Min.
Opening Price
2103588 Utensil Base Pull-Out 8-1/2" x 24" x 22" 12" 9"
10.22 Custom Products | Summer 2021
Interior Storage
10
Base Organizer Units
Designed to be installed inside 9", 12" or 15" wide
full height door base cabinets.
Adjustable door mount hardware included.
Organizer units are fully assembled and packaged
with installation instructions.
Units include adjustable shelves with chrome rails
and full-extension ball bearing drawer glides.
Prefinished in Natural Birch only; unfinished units are
not available.
Door not included.
Base Pull-Out Unit
Designed to be installed in framed or frameless full
height door base cabinets from 9" wide to 24" wide.
Each Pull-Out requires one full extension frame and
one shelf kit, based on the opening width.
Works in both inset and overlay applications.
Includes all cabinet and door mounting hardware.
Each shelf kit contains two trays that can be
installed at the desired height.
Shelf surfaces are covered with a Maple patterned,
non-slip matting to keep stored items in place.
Full extension, soft close runners have an 80 lb. load
capacity.
Attractive Champagne finish coordinates well with
cabinet interiors and exterior colors.
Door not included.
Part No. Description Price
546.62.806 Full Extension Frame – Champagne – 3-3/4" wide x 21-3/8" deep
546.63.878 Base Pull-Out Maple – Champagne – 4" wide x 19-3/4" deep
546.63.877 Base Pull-Out Maple – Champagne – 5" wide x 19-3/4" deep
546.63.859 Base Pull-Out Maple – Champagne – 7" wide x 19-3/4" deep
546.63.812 Base Pull-Out Maple – Champagne – 8" wide x 20-3/8" deep
546.63.832 Base Pull-Out Maple – Champagne – 10" wide x 20-3/8" deep
546.63.813 Base Pull-Out Maple – Champagne – 11" wide x 20-3/8" deep
546.63.833 Base Pull-Out Maple – Champagne – 13" wide x 20-3/8" deep
546.63.814 Base Pull-Out Maple – Champagne – 14" wide x 20-3/8" deep
546.63.834 Base Pull-Out Maple – Champagne – 16" wide x 20-3/8" deep
546.63.815 Base Pull-Out Maple – Champagne – 17" wide x 20-3/8" deep
546.63.835 Base Pull-Out Maple – Champagne – 19" wide x 20-3/8" deep
Part No. Size (W x H x D)
Fits
Cabinet Price
2100771 5" x 25-1/2" x 22-1/2" 9" wide
2100772 8" x 25-1/2" x 22-1/2" 12" wide
2100773 11" x 25-1/2" x 22-1/2" 15" wide
Cabinet Accessories (continued)
Custom Products | Summer 2021 10.23
Interior Storage
10
Cabinet Accessories (continued)
Ready to Install Base Pull-Out
Base Pull-Out Unit ships fully assembled and
includes drawer hardware and floor mounted cleats
for easy installation.
Can be installed in both framed or frameless and
overlay or inset cabinet applications.
Constructed from Natural Birch edgebanded
plywood finished with a durable, clear UV topcoat.
Unique top mount support bracket is rated at
225lb. capacity. Eliminates excessive side-to-side
movement and sag when fully extended.
Drawer hardware is undermount, full extension with
soft close feature.
Integrated 6-way adjustable door mounting
hardware allows for easy installation for all overlays
and framing widths.
Door not included.
Part No. Size (W x H x D)
Fits
Cabinet
Min.
Opening Price
2100832 5-1/2" x 24" x 22" 9" base 6"
2100833 8-1/2" x 24" x 22" 12" base 9"
2100834 11-1/2" x 24" x 22" 15" base 12"
2100835 14-1/2" x 24" x 22" 18" base 18"
Ready to Install Bottom Mount Trash Can Pull-Out
Unit ships fully assembled, including drawer
hardware and floor mounted cleats for easy
installation.
Constructed from Natural Birch edgebanded
plywood finished with a durable, clear UV topcoat.
Single and double units include one or two white
polyethylene trash cans with 35 or 50 quart
capacity.
Single or double 50 quart units require full height
base cabinets.
Drawer hardware is undermount style full extension
with soft close feature.
Single can units fit in a 15" wide cabinet. Double can
units fit in an 18" wide cabinet.
Integrated 6-way adjustable door mounting
hardware allows for easy installation for all overlays
and framing widths.
Door not included.
Part No. Description/Dimensions Price
2100836 Single 35 quart can – 12"w x 21-3/8"d x 19-13/16"h
2100837 Double 35 quart cans – 15"w x 21-3/8"d x 19-13/16"h
2100838 Single 50 quart can – 12"w x 21-3/8"d x 24"h
2100839 Double 50 quart cans – 15"w x 21-3/8"d x 24"h
10.24 Custom Products | Summer 2021
Interior Storage
10
Single Trash Can Unit
Minimum Opening Width: 12" Framed Cabinets.
12-3/4" Frameless Cabinets.
Minimum Opening Height: 19-1/4".
Minimum Interior Depth: 21-13/16".
Double Trash Can Unit
Minimum Opening Width: 14-3/4" Framed Cabinets.
15-1/2" Frameless Cabinets.
Minimum Opening Height: 19-1/4".
Minimum Interior Depth: 21-13/16".
Pull-Out Bottom Mount Trash Can Units
Units are fully assembled and include trash cans,
installation instructions and hardware.
Attaches to back of door with 6 way adjustability.
Door hinging is not required.
Platinum metal base and grey trash cans.
Trash cans are 36 quart capacity.
Bottom mount unit with full extension soft close
slides.
110 lb. weight capacity.
Single and double trash can units available.
Door not included.
Part No. Price
503.15.821
Part No. Price
503.15.822
Cabinet Accessories (continued)
Custom Products | Summer 2021 10.25
Interior Storage
10
Cabinet Accessories (continued)
Trash Can Pull-Out
3/4" Hard Maple plywood top for Hard Maple and
Natural Birch units.
When ordering Trash Can Pull-Outs, specify the drawer
box width. The top will extend 3/8" past the sides of the
drawer box.
Designed to be used with side mount full extension slides
– hardware not included.
Unit with single cut-out includes one 7 gallon, grey color
waste can; double cut-out includes two waste cans;
no cut-out option does not include a waste can.
Front height is 10" to accommodate door mounting
hardware. Rear height is 3".
Depth: 21-3/4" fixed..
Single cut-out: Double cut-out:
Minimum width: 11". Minimum width: 15".
Maximum width: 21". Maximum width: 27".
Unit only, no cut-out (solid top shipped loose):
Minimum width: 11".
Maximum width: 27".
Waste can only: Part #2100102A
Single
cut-out
Double
cut-out
Unit only,
no cut-out
Front
Trash Can Pull-Out
Specie Single Cut-Out Double Cut-Out No Cut-Out
Natural Birch
Maple, Hard
Walnut
10.26 Custom Products | Summer 2021
Interior Storage
10
Cabinet Accessories (continued)
TANDEM Trash Can Pull-Out
3/4" Hard Maple plywood top for Hard Maple and
Natural Birch units.
Designed to be used with Blum TANDEM plus Blumotion
full extension drawer slides and narrow drawer front
locking clips (not included).
Hardware reference numbers:
Blum TANDEM plus Blumotion: 563H5330B.
Narrow Drawer Front Locking Clips: T51.0801.20 (L/R).
Unit with single cut-out includes one 7 gallon grey color
waste can; double cut-out includes two waste cans;
no cut-out option does not include a waste can.
Cut-outs also accommodate 13 gallon trash cans.
Height: 6-3/4" fixed (including 3/4" plywood top).
Depth: 21-3/4" fixed.
Single cut-out: Double cut-out:
Minimum width: 14-5/8". Minimum width: 20-5/8".
Maximum width: 19-1/8". Maximum width: 28-1/8".
Unit only, no cut-out (solid top shipped loose):
Minimum width: 14-5/8".
Maximum width: 28-1/8"
Waste can only: Part #2100102
Single
cut-out
Double
cut-out
Unit only,
no cut-out
Front
Dovetail Drawer Boxes
Our drawer boxes are made in our state-of-the-art Bossier City, Louisiana
facility. Using the best equipment and workers, we create drawers
that will complete your project and add quality and value to your jobs.
Complimentary laser engraving of your logo inside drawer boxes.
800.463.0660 | www.HardwareResources.com [ 563 ]
800.463.0660 | [ 564 ] www.HardwareResources.com
F
G
SIZING
Min.
Depth
Max
Depth
Min. Width
(without clips)
Min. Width
(with 4 &
6-way clips)
Min. Width
(with 2-way
clips)
Max
Width
Min.
Height
Standard Drawer
5/8” Material 7” 51” 6” 7-1/4” 6-1/4” 51” 2”
1/2” Material 7” 51” 6” 7” 6” 51” 2”
Rollout Drawer
5/8” Material 7” 51” 6” 7-1/4” 6-1/4” 51” 2”
1/2” Material 7” 51” 6” 7” 6” 51” 2”
High-Back Rollout
5/8” Material 12” 51” 5-1/2” 7-1/4” 6-1/4” 51” 6”
1/2” Material 12” 51” 5-1/2” 7” 6” 51” 6”
Dovetail Drawer Boxes
HEIGHT OPTIONS 2” 2.5” 3” 3.5” 4” 5” 6” 7” 8” 9” 9.5” 10” 11” 12”
1/2” Birch Plywood x x x x x x x x x x x x x
1/2” Edgebanded Plywood x x x x x x x x x x
5/8” Hardwoods x x x x x x x x x x x x x x
High-Back (all species) x x x x x x x x
*All high-back drawers will have a 3” front and a scoop cutout on the front face. 6” minimum height.
Ordering specifications:
Standard Drawer, Rollout, or High-Back Rollout Boxes
Assembled or Unassembled
Standard Heights with Custom Depth & Width
1/4” Standard or 1/2” Bottom
Optional Universal Notch for Undermount Slides
Optional Undermount Slide Clip factory installed
Production and delivery:
Competitive pricing
Standard 7 Day Turnaround after order confirmation
Quick-to-Ship production on qualifying states
Easy Online
Ordering &
Instant Price
Quoting
See website
for details
A 5/8” Hard Maple …………………………….. UV Coated or Unfinished
B 5/8” Aspen …………………………………. UV Coated
C 5/8”White Birch, Imported, Finger Jointed……… UV Coated
D 1/2”Birch Plywood ………………………… UV Coated or Unfinished
E 1/2”Birch Plywood Edgebanded …………….. UV Coated
F 5/8”Rustic White Birch, Imported, Finger Jointed .. UV Coated
G 5/8”Rubberwood, Imported, Finger Jointed ……. UV Coated
Drawer boxes are manufactured in the USA by Hardware Resources. Hard Maple and Aspen are North American
hardwoods. White Birch, Rustic White Birch, and Rubberwood are imported A/B grade hardwood, laminated &
finger jointed. Birch plywood is Carb Compliant 9-ply high density plywood with no internal voids. UV cured
coating is 100% solid and contains no VOC. Each UV coated piece is double coated to ensure a lasting finish.
D
E
A
B
C
13 mm (1/2")
7 mm
(1/4")
11mm (7/16")
7 mm
(9/32")
37 mm
(1-7/16")
REAR VIEW OF THE DRAWER NOTCH
REAR VIEW OF THE DRAWER NOTCH (BLUM MOVENTO)
7 mm
(9/32") 7 mm
(9/32")
11mm (7/16")
13 mm (1/2")
125mm (4-15/16")
Drawer
Boxes
800.463.0660 | www.HardwareResources.com [ 565 ]
High-Back Rollout
(minimum 6” height)
Rollout
Finger joints may be visible on
top edge of box for White Birch
Drawer Box Linear Material
Rollouts & High-Back Rollouts
Dovetail Drawer Boxes
Height Thickness Coating Ctn Qty
DW58X030 3” 5/8” UV Coated 80LF
DW58X035 3-1/2” 5/8” UV Coated 80LF
DW58X040 4” 5/8” UV Coated 80LF
DW58X060 6” 5/8” UV Coated 40LF
DW58X080 8” 5/8” UV Coated 40LF
DW58X100 10” 5/8” UV Coated 40LF
Height Thickness Coating Ctn Qty
DA58X030 3” 5/8” UV Coated 80LF
DA58X040 4” 5/8” UV Coated 80LF
DA58X060 6” 5/8” UV Coated 72LF
DA58X080 8” 5/8” UV Coated 56LF
DA58X100 10” 5/8” UV Coated 56LF
Aspen drawer box linear material is sold in random
lengths of 5’ - 8’
White Birch, Finger Jointed Aspen
White Birch drawer box linear material is sold in 8’ lengths
in full carton quantity only
Drawer
Boxes
800.463.0660 | [ 566 ] www.HardwareResources.com
Pots & Lids
+ =
CUSTOMIZED STORAGE SOLUTIONS
Rollout Box Drawer Slide
(Pg 112-113)
QuickTray Pilaster System
(Pg 119)
Custom Tray Organizers Drawer
Boxes
800.463.0660 | www.HardwareResources.com [ 567 ]
Storage Pantry
Maximize your kitchen with custom storage
solutions. Our custom order-to-size rollouts are
manufactured in our plant in Louisiana. Add our
best-selling 303FU Series drawer slides and our
QuickTray pilaster system, and you can create
custom storage solutions for your customers.
Great for pantries, pot and lid storage, small
kitchen appliances and miscellaneous kitchen
wares. Customizable for any size cabinet, existing
or new construction. Pg 568-569
Custom Tray Organizers Drawer
Boxes
800.463.0660 | [ 568 ] www.HardwareResources.com
In Stock Preassembled Rollout Drawers
High-Back Drawers - 8” Back & 3” Front Drawer Height
Beautiful White Birch
dovetail boxes with
UV coating
Drawer boxes are built in our plant in the USA
Featuring concealed undermount 3/4
extension Soft-close slides
75lb weight capacity
For your Bath
For 12” opening
ROVHB12-WB
For 15” opening
ROVHB15-WB
For 18” opening
ROVHB18-WB
Skip the measure…design…wait… process
Order rollout drawers that are IN STOCK
Ships same day – Receive it in 2-3 days
Ships fully assembled
Easily and quickly installs with four screws (included)
For existing cabinets or new construction
Designed to fit standard cabinet sizes
Reclaim the space in bathroom cabinets
18” depth designed for bath cabinets
Use multiple rollouts for wide cabinets
Assembled in the
ROVHB15-WB & ROVHB12-WB shown in use
Width Depth Height Bottom
Minimum
Opening
Standard
Cab. Size
RO12-WB 10-1/4” 21-1/4” 7” 1/4” 12” 15” base
RO15-WB 13-1/4” 21-1/4” 7” 1/4” 15” 18” base
RO18-WB 16-1/4” 21-1/4” 7” 1/4” 18” 21” base
RO21-WB 19-1/4” 21-1/4” 7” 1/4” 21” 24” base
RO24-WB 22-1/16” 21-1/4” 7” 1/2” 24” 30” base
RO27-WB 25-1/16” 21-1/4” 7” 1/2” 27” 30” base
RO33-WB 31-1/16” 21-1/4” 7” 1/2” 33” 36” base
ROVHB12-WB 10-1/16” 18-7/16” 9” 1/4” 12” 15” vanity
ROVHB15-WB 13-1/16” 18-7/16” 9” 1/4” 15” 18” vanity
ROVHB18-WB 16-1/16” 18-7/16” 9” 1/4” 18” 21” vanity
Drawer
Boxes
800.463.0660 | www.HardwareResources.com [ 569 ]
In Stock Preassembled Rollout Drawers
For your Kitchen
Rollout Drawers - 6” Drawer Height
For 12” opening
RO12-WB
For 15” opening
RO15-WB
For 18” opening
RO18-WB
For 21” opening
RO21-WB
For 24” opening
RO24-WB
1/2” bottom panel
For 27” opening
RO27-WB
1/2” bottom panel
For 33” opening
RO33-WB
1/2” bottom panel
Dovetail Drawer Box Program
Pre-Finished UV Coating
5/8' European Beech
1/4" Import Birch Bottom
Comes Assembled
Notched and Drilled if needed
Lead Times: 5-7 Business Days
Dimensions Available:Dovetail Drawer Box Program
Pre-Finished UV Coating
5/8' European Beech
1/4" Import Birch Bottom
Comes Assembled
Notched and Drilled if needed
Lead Times: 5-7 Business Days
Dimensions Available:
Depths 12", 15", 18", 21" 1-800-547-9520 | timberproducts.com
Spectrum’s CustomCuts program offers a wide range
of prefinished wood and laminate drawer sides to fit
your project and meet your needs. We partner with our
customers to deliver efficient and cost-effective solutions
for any project.
CustomCuts Drawer Sides
Drawer Side Program
Our numerous machining centers and
state-of-the-art equipment provide costeffective access to a full range of drawer side
manufacturing capabilities.
Edgebanding
Timber Products Company stocks and sources
an extensive variety of edgebanding to match
any laminate or wood species. We also offer
UV finishing on bullnosed edges to match the
high standard of RhinoCoat prefinish.
Quality is Standard
Timber Products offers high-quality wood
drawer sides using our standard hardwood
plywood products. Our drawer sides can be
specified using our RhinoCoat prefinished
hardwood plywood panels.
Special Packaging
All Spectrum component parts are
meticulously packaged for maximum
protection during transit.
Available Stocking Drawer
Side Products
½" C-2 Natural Maple on
7-ply veneer core with 2-side
RhinoCoat prefinish
½" C-2 White Maple on 9-ply
Russian Birch core with
bullnosed edges
4", 6", 8" and 12" widths
and standard 8' length
¼" 4' x 8' RhinoCoat
prefinished panels available
for drawer bottoms
10-piece boxed sets available
Additional Drawer Side Options
Full line of hardwood plywood
Edgebanding in wood, PVC
and more
Bullnosing
Dado
RhinoCoat prefinish
Flexible cut widths
CARB-certified
FSC®
Chain of Custody-certified
Made in USA
Company Divisions
Hardwood Plywood
Component Solutions
Decorative Panels
Particleboard
Hardwood Lumber
Hardwood Veneer
Softwood Veneer
Softwood Plywood
Forestlands
TP Trucking
Timber Products Global
Sales Offices
Manufacturing
Trucking
Corporate HQ
CustomCuts Drawer Sides
Springfield, OR
1-800-547-9520
Germantown, TN
1-800-477-6195
timberproducts.com
©2016 Timber Products Company. All rights reserved. 02/16
Timber Products Company is one of the
nation’s largest and most respected
manufacturers of a comprehensive range of
wood products.
As an independently owned, fully integrated
company with dedicated manufacturing
facilities in both the western and eastern
United States, we provide immediate access
to a tremendous selection of products
and services. We’ve implemented new
technologies to make our operations more
efficient and our products more costeffective. We can respond to your needs
faster, with greater flexibility and with an
absolute assurance of quality.
That’s a tremendous resource for any business.
Heights: 2-1/2", 3-3/8", 4", 5-7/8", 8", 9-5/8"
All drawer boxes over 26" wide will have a support center rail underneath box
Added Features:
Highback Boxes Slanted Sides
Handpulls Front Scoop
Maximum Width 42"
Minimum Width 5"
Depths 12", 15", 18", 21"
Heights: 2-1/2", 3-3/8", 4", 5-7/8", 8", 9-5/8"
All drawer boxes over 26" wide will have a support center rail underneath box
Added Features:
Highback Boxes Slanted Sides
Handpulls Front Scoop
Maximum Width 42"
Minimum Width 5"
Phillips Screwdriver 1 Measure
Measure the cabinet’s interior width,
depth and height. Hold your tape
parallel to the cabinet’s walls. Note
any pipes, shelves, or hinges that may
affect actual available space.
2 Set
Set your drawer base in place
making sure you can open and
close the cabinet door easily.
3 Secure
Using your Phillips screwdriver
(or drill) and the screws provided,
secure your organizer base. Place
the drawer back on the base, and
you’re all done!
It's That Easy! All you need:
Cordless Drill
OR
Scan to watch the
product video
http://delivr.com/2uf4p
RO18-WB shown in use
Drawer
Boxes
800.463.0660 | [ 570 ] www.HardwareResources.com
Complimentary High Definition Laser Engraving on Hardwood Boxes
(upcharge per box for plywood)
Simply provide a high-resolution file of your logo. We’ll do the rest!
Accepted file types are EPS, AI, PDF, PSD, JPEG, TIFF.
Maximum logo size is 1-1/2” tall x 6” long. Minimum box height for engraving is 3”.
Not available on high-back rollouts or boxes over 24” deep.
Placed on the front left inside edge of the box.
One logo per customer. Logos are kept on file for future orders
Don’t have a logo? Choose from our preselected fonts to customize your company name.
Dovetail Drawer Boxes Drawer
Boxes
800.463.0660 | www.HardwareResources.com [ 571 ]
Calculating Drawer Box Sizes for Ordering
5/8” Hardwood Drawer Side Material
WIDTH
When using Hardware Resources (HR) undermount slides, use this calculation:
OVERALL WIDTH = DRAWER OPENING MINUS 3/8”.
When using HR ball bearing or epoxy slides, OVERALL WIDTH = DRAWER OPENING MINUS 1”.
When using another manufacturer’s slide, follow the manufacturer’s slide specifications using
5/8” drawer side material to calculate Overall Width.
HEIGHT
When using HR undermount slides, OVERALL HEIGHT = DRAWER OPENING MINUS 3/4”.
LENGTH
When using HR undermount slides, the OVERALL LENGTH should equal the corresponding slide
length (example: if using the USE21 the drawer depth would be 21”).
When using another manufacturer’s slide, follow the manufacturer’s slide specifications using
5/8” drawer side material to calculate Overall Length.
1/2” Plywood Drawer Side Material
WIDTH
When using HR undermount slides, OVERALL WIDTH = DRAWER OPENING MINUS 5/8”.
When using HR ball bearing or epoxy slides, OVERALL WIDTH = DRAWER OPENING MINUS 1”.
When using another manufacturer’s slide, follow the manufacturer’s slide specifications using
1/2” drawer side material to calculate Overall Width.
HEIGHT
When using HR undermount slides, OVERALL HEIGHT = DRAWER OPENING MINUS 3/4”.
LENGTH
When using HR undermount slides, the OVERALL LENGTH of the box is the corresponding slide
length MINUS 1/8” (example: 20-7/8” on a 21” slide).
When using another manufacturer’s slide, follow the manufacturer’s slide specifications using
1/2” drawer side material to calculate Overall Length.
Dovetail Drawer Boxes Drawer
Boxes
Prefinished Birch Drawer Sides
Tandem Trash Can Pull-Out
Specie Single Cut-Out Double Cut-Out No Cut-Out
Natural Birch
Maple, Hard
Walnut
Custom Products | Summer 2021 10.27
Interior Storage
10
Pet Insert
Can be sized to fit a specific drawer box or
ordered separately. If ordered separately,
specify width and depth.
Available in Hard Maple and Natural Birch.
3/4" thick Natural Birch plywood insert and
divider.
Insert accommodates 5", 6-1/2" and 7-3/8"
diameter bowls (not included). Bowls are
available at most pet stores.
Not intended to accommodate water bowls.
2" high plywood divider is shipped loose.
Plywood base plate is pre-drilled with pilot
holes for divider installation.
Available in drawer box depths between
18" to 21".
Single cut-out: Double cut-out:
Natural Birch Natural Birch
Hard Maple Hard Maple
Minimum width: 12-3/4". Minimum width: 15".
Maximum width: 18". Maximum width: 36."
Cabinet Accessories (continued)
10.28 Custom Products | Summer 2021
Interior Storage
10
Cabinet Accessories (continued)
Part No. Description
Framed
Min. Opening
Frameless
Min. Opening Price
2103591 32" Half Moon Susan Set w/Wood Shelves 12" 13-1/4"
2103592 35" Half Moon Susan Set w/Wood Shelves 15" 16-1/4"
2103593 38" Half Moon Susan Set w/Wood Shelves 18" 19-1/4"
2103594 31" Half Moon Susan Set w/Plastic Shelves 13-1/4" 15"
2103595 33" Half Moon Susan Set w/Plastic Shelves 16-1/8" 17-7/16"
2103596 39" Half Moon Susan Set w/Plastic Shelves 19-1/4" 20-3/4"
Wood Half Moon Lazy Susan
Plastic Half Moon Lazy Susan
Half Moon Lazy Susan System
Designed to fit into blind corner cabinetry, providing
greater access to items stored in recessed areas of
the cabinet.
Half moon units will not work with concealed inset
hinges.
Shelves swing out and also slide forward for ease of
access to individual shelving.
Shelving material options include:
Wood: 5/8" thick Maple veneer core plywood with
a 1" high solid Maple finger jointed rim; all finished
with a durable UV clear coat.
Plastic: white polymer molded shelves that are
moisture and stain resistant.
Half Moon Lazy Susan Wood Shelf System Kit
includes:
Two shelves with shelf supports.
Two positioning bases.
Two pairs of slides.
One 17" chrome plated shaft with aluminum
bearings.
One standard bracket for framed cabinetry.
One Euro bracket for frameless cabinetry.
Template and mounting instructions.
Half Moon Lazy Susan Plastic Shelf System Kit
includes:
Two shelves with shelf supports.
Two positioning bases.
Two pairs of slides.
One 15-7/8" chrome plated shaft with aluminum
bearings.
One standard bracket for framed cabinetry.
One Euro bracket for frameless cabinetry.
Template and mounting instructions.
Units are universal – swing left or right.
Custom Products | Summer 2021 10.29
Interior Storage
10
Cabinet Accessories (continued)
LeMans II Corner Pull-Out Shelf
Designed to be installed inside either full height or
drawer/door blind corner base cabinets.
Minimum door opening angle of 90 degrees
required.
Unit includes 2 trays and 2 posts.
Shelves have Maple patterned non-slip surfaces
with platinum colored metal rails.
Shelf height is adjustable.
Can easily be retrofitted into existing blind corner
cabinetry.
Maximum load per shelf is 65 lbs.
Corner Pull-Out Shelf
Part Number
Shelf
Size
Interior Width
A
Interior Depth
B
Opening width
(Framed) C
Opening Width
(Frameless) C Swing Price
541.32.445 15" 32-1/4" 21" 16-1/8" 17-1/8" Right
541.32.446 15" 32-1/4" 21" 16-1/8" 17-1/8" Left
541.32.450 18" 36-1/4" 21" 17-3/4" 18-3/4" Right
541.32.451 18" 36-1/4" 21" 17-3/4" 18-3/4" Left
541.32.460 21" 38" 21" 21-1/4" 22-1/4" Right
541.32.461 21" 38" 21" 21-1/4" 22-1/4" Left
Swings Left
C
B
A
C
A
B
Swings Right
Blind Corner System
Swing-out pantry and roll out shelves maximize
accessibility in blind corners.
Units include drawer slides and installation
instructions.
Designed for blind cabinets with 15" wide or larger
openings.
Minimum frame opening height required is 19-3/4".
Minimum cabinet interior depth is 22-5/8". Will
not work with standard depth Cabinet Systems
cabinetry or inset applications.
Piano hinge on swing-out unit is reversible for left
and right installation applications.
1/2" thick Maple with a clear finish; unfinished units
not available.
Part No. Description Price
2100790 Blind Corner System
10.30 Custom Products | Summer 2021
Interior Storage
10
Cabinet Accessories (continued)
Part No. Size (W x H x D)
Fits
Cabinet* Price
2100767 11-3/4" x 18" x 22" 15" wide
2100768 20-3/4" x 18-1/8" x 22" 24" wide
Two-Tier Cookware Organizers
Units are designed to be installed inside 15" or 24"
wide base cabinets*.
Two independent racking systems accommodate
pots, pans and their corresponding lids.
Vertical dividers are independently adjustable.
Units mount to floor, side and back of cabinets.
100 lb. capacity full extension drawer glides.
Installation hardware included.
Wire frame construction with chrome finish.
Heavy Duty Mixer Lift
Side mounted hardware kit designed to be installed
in full height base cabinets.
Recommended for use in 18", 21" or 24" wide full
height door cabinets.
Gas cylinder assist moves heavy stand style mixers
effortlessly.
Champagne finish.
30 lb. weight capacity accommodates most stand
style mixers.
Installation hardware included.
Shelf not included.
Part No. Fits Cabinet Price
504.20.900 18", 21" or 24" (wide)
*Use of concealed inset hinges will require a 3" wider
cabinet to accommodate unit.
Custom Products | Summer 2021 10.31
Interior Storage
10
Cabinet Accessories (continued)
U-Shaped Tray Dividers
Floor or shelf mounted units designed to be installed
in most wall, base and tall cabinets.
Sold individually, each unit provides 3" of storage
space; use multiple units as necessary to divide and
accommodate cabinet interior space.
Installation hardware included.
Wire frame construction with chrome finish.
Part No. Size (W x H x D) Price
2100765 3" x 10" x 11-7/8"
Tray Roll-Out
Designed to be installed inside 9", 12" or 15" wide
cabinets.
Units are fully assembled including drawer slides
and installation instructions.
Maple plywood construction with removable
dividers.
Units are 10" high and 22-5/16" deep fixed. Will
not work with standard depth Cabinet Systems
cabinetry or inset applications.
Door requires special lower hinge height location
to clear 3-1/4" high drawer front; 6" from bottom of
door is recommended with 1-1/2" cabinet framing.
Does not work with concealed inset hinges.
Prefinished in Natural Birch only; unfinished units are
not available.
Part No. Description Price
2100791 Roll-out for 9" base cabinet (5-3/4" wide) – 1 divider
2100792 Roll-out for 12" base cabinet (8-3/4" wide) – 2 dividers
2100793 Roll-out for 15" base cabinet (11-3/4" wide) – 3 dividers
10.32 Custom Products | Summer 2021
Interior Storage
10
Sink Front Tip-Out Trays
Designed to provide convenient storage behind sink
drawer fronts.
Sold in pairs; can be used individually for smaller
drawer fronts or in tandem for wider drawer fronts.
Trays are almond, high impact polystyrene. One tray
is open and one includes an integral soap dish and
ring post.
Each kit includes two pairs of spring loaded scissor
style hinges and installation hardware.
Drawer fronts are not included.
Part No. Size (W x H x D) Price
2100769 11"x 3-13/16"x 2-1/8"
2100770 14"x 3-13/16"x 2-1/8"
Part No. Size (W x H x D) Price
2100775 13" x 9-3/4" x 19-1/4"
2100776 15-7/8" x 9-3/4" x 19-1/4"
File Drawer Support Systems
Insert unit designed to fit inside of deep drawers to
accommodate hanging folder systems.
Designed for 18" or 21" wide cabinets. Rails are
trimmable for additional customization.
Small file system accommodates letter size hanging
folders.
Large file system accommodates legal size hanging
folders.
Wire frame construction with black finish.
Hanging folders and drawer fronts not included.
Cabinet Accessories (continued)
Under-Sink Mat
Designed to contain water or other fluids to prevent
damage to cabinet.
Dimpled surface can collect 1 gallon of liquid per
6 square feet.
Can be easily cut to fit most cabinet interiors.
Polystyrene sheet with grey/stainless finish.
Part No. Size Price
547.91.550 24-5/8" x 45-1/2"
Custom Products | Summer 2021 10.33
Interior Storage
10
Cabinet Accessories (continued)
Lazy Susan Shelves
Wood susans are designed to be installed onto adjustable shelves or cabinet floors. Pricing
includes susan and mounting ring bearing only, cabinet shelves not included.
Susans mount directly onto shelving and cabinet bottom - no center pole is required.
All susans are prefinished with a clear topcoat; unfinished units not available.
Standard Wood Lazy Susan Shelves
1/2" thick Hard Maple plywood with a 1-1/2" high laminated
edge.
Sold individually and includes a center mounted ring bearing.
Wire Rim Wood Susan Shelves
1/2" thick Hard Maple plywood with 1-1/2" high laminated
edge and 2" high powder coated wire rim.
Interior height is 3".
Both the full round and kidney shelves wire rim include a
center mounted ring bearing.
Sold in pairs only.
Part No. Description Price
2100053A 18" Full Round Wood Lazy Susan
2100051A 32" Full Round Wood Lazy Susan
2100052A 28" Kidney Wood Lazy Susan
2100050A 32" Kidney Wood Lazy Susan
Part No. Description Price
2100785A 28" Full Round Wire Rim Lazy Susan Set
2100786A 32" Full Round Wire Rim Lazy Susan Set
2100787A 28" Kidney Wire Rim Lazy Susan Set
2100788A 32" Kidney Wire Rim Lazy Susan Set
10.34 Custom Products | Summer 2021
Interior Storage
10
Lattice Wine Racks
Sold individually (specify two pieces
if pair is desired).
Trimmable in length and width.
Standard rack bottle openings are 4" x 4".
Square and Deluxe bottle openings are
4-1/4" x 4-1/4".
Square and Deluxe wine racks can
be used to make a pair.
Available unfinished or finished. See
Finishing Program Section for pricing.
Cabinet Accessories (continued)
Lattice Wine Rack Pricing
Model Size
Unfinished Price
Cherry Hard Maple
Standard 17" x 36"
24" x 30"
24" x 43"
Square 17" x 36"
24" x 30"
24" x 43"
Deluxe 17" x 36"
24" x 30"
24" x 43"
Standard Square Deluxe
Square
cross section
11/16"
11/16"
Deluxe
cross section
Standard
cross section
7/16"
3/4"
11/16"
11/16"
Half Round Wine Racks
Design Charge, Material Category B.
Use 1.25 sq. ft. to calculate 30" racks and 1.50 sq. ft.
to calculate 36" racks.
Sold in pairs (front and back).
3/4" thick only, 30" or 36" length.
Front is 2" high, back is 3" high.
Bottle cut-outs start 3" from end on 30" and 3-1/2"
from end on 36".
30" holds 5 bottles, 36" holds 6 bottles.
Horizontal grain direction only.
Available unfinished or finished. See Finishing Program
Section for pricing.

Drawer Sides
States Industries LLC • PO Box 41150 • Eugene, OR 97404 • 800.626.1981 • StatesInd.com
Improve Productivity and
Reduce Expenses
Pre-fabricated drawer sides from States
Industries eliminate labor-intensive
steps, increasing your productivity
and lowering your costs. Drawer box
construction takes one-third the time
of scratch-built drawers. Each item is
precision engineered for consistency
in fabrication when it arrives on your
shop floor. This precision reduces
waste and assures you a simpler
bidding process with clearly
defined prices.
All drawer side orders are custom.
Drawer sides are available in a range
of options and are manufactured to
meet the exacting specifications of
each unique application or project.
Packaged 10 drawer
sides per box or in
bulk packaging
Genesis Products Email Format | genesisproductsinc.com …

RocketReach
https://rocketreach.co › genesis-products-email-format_…
Genesis Products uses 9 email formats: 1. first last_initial@genesisproductsinc.com (93.7%). Enter a name to find & verify an email >>>

Contact Genesis Products | Elevate Your Environment

Genesis Products
https://genesisproductsinc.com › resources › contact-us
Genesis Products is a business-to-business manufacturer of industrial components and the go-to company for every phase of the design, sourcing and manufacturing …
People also ask
What is the email format for Genesis products?
What is the email format for Genesis Motors?
How do I email Beaufort Bonnet Company?
What is the email format for Genesis Energy?
Feedback

Career Opportunities

Genesis Products
https://genesisproductsinc.com › about-genesis › career-o…
Don't see an opening for your skill set? Email us at careers@genesisproducts.com—we'd love to get to know you.

Genesis Products Email verification & Email checker

NeverBounce
https://www.neverbounce.com › company › genesis-pro…
What is the email domain for Genesis Products? The email domain for Genesis Products is genesisproductsinc.com. How can I …

Genesis Products Email Format

LeadIQ
https://leadiq.com › genesis-products › email-format
Genesis Products's email format typically follows the pattern of FirstL@genesisproductsinc.com; this email format is used 87% of the time. Other contacts within …

Drawer Side Brochure-noFSC

North American Plywood
https://naply.com › wp-content › uploads › 2022/06
PDF
Baltic. Birch drawer sides are made for extended life to endure heavy loads. Prefinished drawer sides are coated on both sides with our durable UV clear coat.

Drawer Sides

States Industries
https://www.statesind.com › uploads › 2020/09
PDF
When ordering drawer sides, specify NOVA UV-cured finishes to avoid … All drawer sides are prefinished with the exception of the aro- matic cedar …

Pre-finished Plywood

Boulter Plywood
https://www.boulterplywood.com › prefinished_plywood
Maple Pre-finished. UV Acrylic finish, B - 2 Grade, Domestic poplar core. 3 … Maple Drawer Sides. 1/2" Pre-Finished Maple Edge Banded 1 Side with a 1/4" dado.

Drawer Side Blanks

Woodworker Express
https://www.woodworkerexpress.com › drawer-blanks
All wood blanks are pre-finished with "Endura" ultraviolet cured top coat and are ready to assemble; All drawer blanks have 1/4" drawer bottom dado and a 1/2" …

Drawer Side Material, 1/2" Groove, 1/2" Thick, 6" x 96", Maple

Wurth Machinery
https://www.wurthmachinery.com › … › Drawer Materials
Drawer Side Material, 1/2" Groove, 1/2" Thick, 6" x 96", Maple. High Quality Drawer Blanks for Undermount Slides, Pre-finished with Endura UV Cured Top Wurth …
$22.20 · ‎$7,000 7–17 day delivery · ‎30-day returns

Product Image: Drawer Side Materials

Baer Supply Company
https://www.baersupply.com › wbsc › product › catalog
… drawer blank systems are available veneer plywood • All wood blanks are pre-finished with "Endura" ultra violet cured top coat and are ready to assemble • All …
drawer sides UV prefinished from www.baersupply.com

Drawer Side

Arrow Forest, LLC.
https://www.arrow-forest.com › products › speciality-item
Option : UV Prefinished 2 sides + Top edge. Applications: Cabinet drawer. Origin : China. IPDrawer Side PLY. Drawer Side (Plywood). Veneer Cut : R/C. Veneer …

DRAWER SIDES

Interglobal Forest
https://www.interglobalforest.com › drawer-sides
Ready-to-use, pre-cut birch drawer sides are finished with an ultraviolet cured laquer and an edge-banded top edge.

E.B. Bradley Co. Drawer Side | Grooved | 8"H x 96"L | Maple

EB Bradley
https://www.ebbradley.com › …
Top edge is pre-finished veneer banding. 7 ply hardwood plywood veneer core with a standard maple veneer. Ultraviolet cured flatline finish, epoxy acrylate …

Gluing UV-Prefinished Plywood

Woodweb
https://woodweb.com › knowledge_base › Gluing_UVPr…
I'm working through my first experiences with UV prefinished ply. At first glance I was pretty sure none of my normal glues were going to stick to the UV …

CustomCuts

Timber Products
https://timberproducts.com › uploads › 2021/05
PDF
Spectrum's CustomCuts program offers a wide range of prefinished wood and laminate drawer sides to fit … We also offer. UV finishing on bullnosed edges to match …

Solid Birch Wood Drawer Box, 14-5/8 in. Width, 8 in. Height …

CabinetParts.com
https://www.cabinetparts.com › cabinetparts-doityoursel…
Not Compatible Slides : Blum Movento Series Slides. Accuride 3135 Eclipse; Species : 5/8" White Birch; Finish : UV Coated; Packaged : Unassembled. Shipping …
4.6(204) · $79.97 · ‎30-day returns

Pre finished drawer sides : r/woodworking

Reddit · r/woodworking
9 comments · 12 months ago
Does anyone have a supplier of pre made drawer sides that they like? I have seen tons of them out there and I want to replace a bunch of …
Missing: UV ‎| Show results with: UV

Drawer Boxes

Cullman Cabinet & Supply
https://www.cullmancabinet.com › drawer-boxes
Dovetail Drawer Box Program. Pre-Finished UV Coating; 5/8' European Beech; 1/4" Import Birch Bottom; Comes Assembled; Notched and Drilled if needed; Lead Times: …

NAM TIEN PLYWOOD PRODUCTION AND EXPORT

Vietnam Plywood Group
http://www.vietnamplywoodgroup.com › nam-tien-plyw…
UV Baltic Birch Plywood Drawer Sides. Birch Plywood Drawer Sides. UV Prefinished With Edgebanding. Made in Vietnam. White Birch Plywood. Made in Vietnam.

white maple apple ply drawer sides

MacMurray Pacific
https://macpac1.com › viewCatalog
Clear UV finish on White Maple looks great, stays hard and resists water … 7 pcs. $ 50.40 Finished on one side only. Full Cartons Only. Fax Orders to …
UV Prefinished - Plywood

The Home Depot
https://www.homedepot.com › … › Plywood
… Stock at Store Today. Same-Day Delivery. Plywood Features: UV Prefinished. 3/4 … Drawer Garage Cabinets in Black and Grey · (4.3 / 16). $ …
drawer sides UV prefinished from www.homedepot.com

Prefinished Birch Plywood Cabinet, type of paint - LumberJocks

lumberjocks.com
https://www.lumberjocks.com › … › Finishing
Nov 27, 2016 — I'm building a cabinet out of prefinished birch plywood which I'm using for the drawer fronts, and wanted to paint it white (or off-white actually).

UV Wood, Finished Hardwood Plywood

Columbia Forest Products
https://www.columbiaforestproducts.com › product › u…
Drawer Sides. Cores. Back; Cores; All Products in Cores · CFP60″s® · PureBond … You'll appreciate the savings of pre-finished UV Wood panels, which elminate …

RED AND WHITE BIRCH UV PREFINISHED PLYWOOD …

LinkedIn · Wardrobe and Bathroom Cabinets Kitchen Cabinets
2 weeks ago
Thanks with Best regards Robert Marketing & Sales NAM TIEN PRODUCTION AND EXPORT CO.,LTD Phone/Whatsapp +84 39 698 8096 Email: …
Genesis Products Email Format

ContactOut
https://contactout.com › company › genesis-products-e…
The widely used Genesis Products email format is {first}{l}@genesisproductsinc.com (e.g. johns@genesisproductsinc.com), which is used 71.43% of the time.

Solid Wood Quote Form

Genesis Products
https://genesisproductsinc.com › solid-wood-quote-form
… email to drawers@genesisproductsinc.com. Thank you! All quote requests will be answered within 24-48 hours after receipt/after clarification of required …

Durawrap Quote Form

Genesis Products
https://genesisproductsinc.com › durawrap-quote-form
… email to drawers@genesisproductsinc.com. Thank you! All quote requests will be answered within 24-48 hours after receipt/after clarification of required …

Genesis Products

Facebook · Genesis Products
2 reactions · 2 months ago
… genesisproductsinc.com to grab a time … Just reach out to your sales rep or email fundersales@genesisproductsinc.com to grab a time slot.

Genesis Products
https://genesisproductsinc.com › terms-of-use
Jul 19, 2021 — 17. Contact Us. If you have questions, comments, or concerns regarding these Terms, please contact us at: panelexperts@genesisproductsinc.com
Drawer Sides
States Industries LLC • PO Box 41150 • Eugene, OR 97404 • 800.626.1981 • StatesInd.com
Pre-Fabricated
Buying small quantities of drawer
sides instead of units of panel goods
means you can afford to offer valueadded features while creating unique
and profitable finished products.
When ordering drawer sides,
specify NOVA UV-cured finishes to
avoid finishing altogether or direct
your finishing labor to more critical
areas. NOVA finishes are durable
and beautiful.
Purchasing pre-fabricated drawer
sides allows you to focus on the
processes where you are most efficient. It also provides you with fixed
costs for those outsourced parts and
increases your productivity.
Fully Customizable
All drawer sides are custom. No
matter your budget, our integrated
manufacturing process enables us
to tailor drawer sides for your unique
application and project.
We can build one or as many drawer sides as you need. They are available edge banded or bullnosed and
with or without a kerf for a drawer
bottom. Cores include veneer,
ApplePly® and Baltic birch. Maple,
oak, cherry and birch veneers may
be selected, as well as a combination of maple and aromatic cedar.
Premium Solid Maple drawer sides are handcrafted of
solid North American Maple that has been graded for color
uniformity and blemish-free appearance.
ApplePly drawer sides feature 9-ply, two-step construction
that offers the assurance of clean dovetails, stronger doweled
joints and smoother dados than conventional plywood. They
are Forest Stewardship Council® certified and free of
urea-formaldehyde resins.
Veneer Core drawer sides may be laminated in one step
for maximum economy or constructed and sanded to a
metered tolerance. These drawer sides are lightweight, high
in dimensional stability and bending strength and hold screws
better than most other substrates.
Baltic Birch drawer sides offer a combination
of strength and aesthetics at a price point
suited to all budgets. These drawer sides
feature 9 plies of birch that are virtually void free and offer
stability, strength and excellent machining properties.
Melamine drawer sides offer a clean, modern look at a lower
price point. They are commonly used in cabinet, closet and
commercial applications. Melamine drawer sides are available
in a variety of colors with particleboard or MDF cores.
All drawer sides are prefinished
with the exception of the aromatic cedar veneers. Prefinished,
solid white maple drawer sides
are also available.
Drawer bottoms are
also available!
Ask us about custom options.

Leave a Reply Cancel reply